Measure the pour area
Use finished dimensions for length and width. For irregular areas, split the project into smaller rectangles.
construction
Paver Calculator
Estimate paver count for patios and walkways using area and common paver sizing. Results update instantly as you change the inputs.
Pavers needed120.00 square feet
- Waste / coverage
- 12x12 in pavers, 10% waste
- Area
- 120.00 ft²
How to use it
Enter slab thickness
Most patios and walkways use 4 inches. Driveways and load-bearing work may need more.
Order with waste
Use the 10% waste recommendation to cover spillage, uneven subgrade, and small measurement errors.
Related calculators
Sand Calculator Estimate sand volume and tons for leveling beds, pavers, and base layers. Gravel Calculator Calculate gravel cubic yards and approximate tons from area and depth. Patio Concrete Calculator Estimate concrete yards and bags for a backyard patio or outdoor pad. Deck Board Calculator Estimate deck board count from deck length, depth, board width, gap, and stock length. Paint Calculator Estimate paint gallons for walls or flat surfaces using square footage and common coverage. Rebar Calculator Estimate rebar sticks for a rectangular reinforcement grid. Square Footage Calculator Calculate square footage from length and width for material planning. Tile Calculator Estimate tile boxes with a 10% waste allowance.
FAQ
Concrete estimating questions
How does the paver calculator work?
Enter the project dimensions and the calculator converts them into material quantities using common construction estimating formulas.
Should I add waste?
Yes. Most material orders should include a waste allowance for cuts, spillage, uneven base, and field measurement variation.
Are these results final construction advice?
No. Use these estimates for planning, then verify product yield, local code, structural requirements, and supplier recommendations.